direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Inhalt des Dokuments

Publikationen

Suche nach Publikationen




Komplette Liste

2019

Stathopoulos, P., Rähse, T., Vinkeloe, J. and Djordjevic, N. (2019). Steam injected Humphrey cycle for gas turbines with pressure gain combustion. Energy, 116020.

Link zur Publikation

Hanraths, N., Bohon, M. D., Paschereit, C. O. and Djordjevic, N. (2019). Gas Sampling Techniques for NO x emissions in Pulse Detonation Combustion. AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics.

Link zur Publikation

Vinkeloe, J., Zander, L., Szeponik, M. and Djordjevic, N. (2019). Tailoring the Temperature Sensitivity of Ignition Delay Times in Hot Spots Using Fuel Blends of Dimethyl Ether, Methane, and Hydrogen. Energy & Fuels, null.


Vinkeloe, J. and Djordjevic, N. (2019). Optimierung der Temperaturabhängigkeit von Zündverzugszeiten für pulsierende stoßfreie Verbrennung durch Brennstofftailoring. 29. Deutscher Flammentag, September 2019, Bochum, null.


Zander, L., Tornow, G., Klein, R. and Djordjevic, N. (2019). Knock Control in Shockless Explosion Combustion by Extension of Excitation Time. Active Flow and Combustion Control 2018. Springer International Publishing, 151–166.


2018

Hanraths, N., Tolkmitt, F., Berndt, P. and Djordjevic, N. (2018). Numerical Study on NO x Reduction in Pulse Detonation Combustion by Using Steam Injection Decoupled From Detonation Development. Journal of Engineering for Gas Turbines and Power. American Society of Mechanical Engineers, 121008.

Link zur Publikation

2017

Djordjevic, N., Hanraths, N., Gray, J., Berndt, P. and Moeck, J. (2017). Numerical Study on the Reduction of NOx Emissions From Pulse Detonation Combustion. Journal of Engineering for Gas Turbines and Power

Link zur Publikation

Hanraths, N., Gray, J., Berndt, P., Moeck, J. and Djordjevic, N. (2017). Numerical study on the effectiveness of common NOx reduction measures when applied to pulse detonation combustion. First International Constant Volume and Detonation Combustion Workshop


Oddos, R., Lhuillier, C., Zander, L., Habisreuther, P., Zarzalis, N. and Djordjevic, N. (2017). Experimental and Numerical Study on Diluted Laminar Hydrogen-Enriched Premixed Methane/Air Flames. European Combustion Meeting


Zander, L., Tanneberger, T., Peukert, J. and Mensah, G. (2017). The implementation of WikL - an educational wiki supporting collaborative learning in engineering university courses. Proceedings of the ASME Turbo Expo 2017


2016

Kolb, T., Aigner, M., Kneer, R., Müller, M., Weber, R. and Djordjevic, N. (2016). Tackling the challenges in modelling entrained-flow gasification of low-grade feedstock. Journal of the Energy Institute, 485–503.

Link zur Publikation

Stoesser, P., Ruf, J., Gupta, R., Djordjevic, N. and Kolb, T. (2016). Contribution to the Understanding of Secondary Pyrolysis of Biomass-Based Slurry under Entrained-Flow Gasification Conditions. Energy & Fuels, 6448–6457.

Link zur Publikation

Zander, L., Berndt, P., Klein, R., Paschereit, C. O. and Djordjevic, N. (2016). Optimization of Combustible Mixtures for Shockless Explosion Combustion. ASME Turbo Expo 2016, Poster.


Scarpato, A., Zander, L., Kulkarni, R. and Schuermans, B. (2016). Identification of multi-parameter flame transfer function for a reheat combustor. ASME Turbo Expo 2016


Zusatzinformationen / Extras

Direktzugang

Schnellnavigation zur Seite über Nummerneingabe